You can see in this video that has finally acquired most of the equipment he had at Landers, which is necessary for the Advanced Seismic Warning System. The Eric Dollard Fan Club is largely responsible for much of this as well as some other donors and supporters of this work.
The time frame is that between now and the next 8 weeks, we’re planning on supporting Justin (Secretary & Treasurer of EPD Laboratories, Inc.) in getting to the lab to build some shelving units. This was delayed at the end of Nov beginning of Dec due to a sewer breakdown for the building, which occurred under the sidewalk out front. This took a few weeks alone as Justin personally had to dig up the sidewalk and get to the sewer but thankfully, the town’s various departments did pitch in to help re-route the buildings outlet to another nearby sewer line. This problem happened right after there was a breakdown in one of the primary vehicles used to get out to the lines but progress is being made. You can see the bench tests Eric is running in the last video to calculate the loading coil network that goes on every several poles on the transmission structure.
The plan is for Justin to then come back in April to assist Eric in completing the repair of some of the poles and to install and finish the cross arm work and string up up the lines and demonstrate the beginnings of being able to show the Earth signals. This was planned to be done in December but was delayed because of the above reasons.
Enjoy the video – there are just a couple more from my trip but we are planning to host a live Q & A call with Eric where you can call in live and ask him questions probably before these other couple videos are released so stay tuned!
Here is a video presentation of Eric Dollard showing his recent bench experiments with analog networks that demonstrate both transverse and longitudinal propagation. When used together, time is cancelled out of the equation so that information can transmit from one end of the system to the other with no time delay. That isn’t faster than the speed of light, it is instantaneous or extraluminal.
Here are photographs from a recent visit to EPD Laboratories, Inc. showing Eric Dollard working on some Transverse & Longitudinal Analog Networks, which cancel time out of the equation on transmission lines when used together. That means that signals can propagate from end of the transmission structure (lines) to another without any time delay. That isn’t faster than the speed of light since there is no velocity, it is instantaneous, which is extraluminal.
A new video walk through by Eric Dollard is coming soon that will explain what you see in the pictures below.
Stephen P. McGreevy’s work is very closely related to Eric Dollard’s work with the seismic project. Go here for a recent interview with Stephen P. McGreevy at EPD Laboratories, Inc.
There is a LOT of wind in some parts so some audio is not audible, but it is all left in the video to make it complete.
There are more videos and pictures of my (Aaron) recent trip to Eric Dollard’s lab and the rest have really good audio so stay tuned… in the meantime, watch this:
Here is a set of pictures where I (Aaron Murakami) drove with Eric Dollard and Stephen McGreevy up to the transmission line site. The transmission lines are about 1.25 miles long, which makes this the largest scale Tesla-Alexanderson type transmission project in the world.
Part of the lines run adjacent to some power lines, which may cause interference so EPD Laboratories, Inc. may only use part of the lines.
We also drive up to an old seismic mine, which is now under the control of EPD Laboratories, Inc. There are 2 highly sophisticated seismographs, which will be used as part of the data to predict earthquakes 6.0 and above 48-72 hours ahead of time. The other 3 pieces of data is solar flux activity and above and below ground signals, which the transmission structure will receive.
A video will be coming soon explaining in detail what you see in the pictures below. It was very windy so some of the audio is hard to hear, but it will be left in the video so you get the raw uncut version.
A Common Language for Electrical Engineering – Lone Pine Writings
This collection of papers started appearing in discussion threads on Energetic Forum around 2011. At the time, Eric Dollard was living in his famous 1980 Toyota Corolla, in the harsh wastelands of Lone Pine, California.
Originally, Eric wrote the material out on paper and mailed it to a colleague who transcribed the material and posted it in the forums under the pseudonym “T-REX”.
Each paper or letter was called a “transmission” in honor of the language of a radio operator and contained information on specific electrical engineering terms and how they are to be used. The original format of the material is retained in this edition of the book. The phenomena we call “electricity” is a dynamic, but artificial presentation of the Natural World, and because of this, its behavior follows specific rules.
Understanding these specific behaviors is the key to engineering this phenomena, but developing a common language with which to describe these behaviors is the key to teaching others these engineering skills.
The purpose of this book is to provide clarity for the electrical engineering community regarding the use of common terms for electrical units. The last attempt to standardize this language was made by Oliver Heaviside over 100 years ago and his effort was met by censure from the Royal Society of London. It is hoped that the release of this book will be met with a more enlightened response.
A portion of the proceeds will go to EPD Laboratories, Inc., a 501(c)3 tax-deductible non-profit corporation that supports Eric Dollard in advancing the electrical sciences.
70% OF THE PROCEEDS FROM THE NEW PACKAGE PURCHASED WITH THE LINKS BELOW GO TO ERIC DOLLARD & EPD LABORATORIES, INC.
IT’S ONLY $7 SO GET A COPY TO HELP COVER ERIC’S TRAVEL COSTS TO DO THIS PRESENTATION!
Crystal Radio Initiative
Crystal Radios are free energy devices because they don’t need batteries. They are powered by the very AM radio waves that they’re tuned in to. This is a profound concept, but has its limitations because by the time the energy transmitted in those radio waves are received by the crystal radio, there isn’t much left. There is barely enough to just power the headset so you can listen to the station. Some people have lit LED lights with Crystal Radios but its not really anything to write home about.
These AM radio waves are electromagnetic in nature and are known as Transverse Waves. These waves conform to the Inverse Square Law, which means that energy is diminished by the square of the distance. The further the waves are from the radio station, the less energy there is at the receiving end. So, if you wanted to power something significant at the receiving end, this is not the route you want to take.
Nikola Tesla figured out a more fruitful path many years ago and the concept is very simple. Every AM radio station not only transmits Transverse Waves through the air, it transmits Longitudinal Waves through the Earth! What is significant about this ground transmission is that it does not conform to the Inverse Square Law.
The energy between the AM station and the receiver for this ground transmission does not diminish by the square of the distance. That means that the energy in this ground transmission has almost no loss between the transmitter and receiver. Therefore, if you wanted to power something significant from an AM transmission, this IS the route you want to take.
In addition to the ground transmission being nearly lossless, it is also faster than the electromagnetic waves sent through the air. The electromagnetic waves are moving just about at light speed so if the longitudinal ground transmission gets to the receiving end faster, what does that tell you? It is not subject to light speed limitations. It is not faster than the speed of light, it is instantaneous for all practical purposes and is therefore Extraluminal.
To experience exactly what Tesla had his hands on, which obviously overturn the conventional apple cart, what you need is not just any Crystal Radio but a Tesla type Crystal Radio using a Tesla Resonant Transformer. It is similar to a regular Crystal Radio, but it does not have an antenna – that is all build into the coil and it connects to the Earth. It is also actually very simple in principle and you can figure out how to build your own real Tesla Resonant Transformer with nothing more than junior high school basic algebra.
Months ago, we gave out a free video presentation by Eric Dollard called the Crystal Radio Initiative along with a free 300 page book with all the notes, schematics and discussions on this open source project – that book and video are now part of a new package that has a brand new presentation.
Recently, Eric came to Spokane, Washington to work on some projects and to give a presentation teaching anyone how to calculate a real Tesla Resonant Transformer. And, you’re going to learn it by the most authoritative expert in the world on the subject. It can be used for this Tesla Crystal Radio project, a Cosmic Induction Generator (another one of Eric’s projects) or a multitude of other projects relating to the Tesla sciences. With one coil or a set of coils, you can do countless experiments just like what Eric has demonstrated over the last several decades.
A Common Language for Electrical Engineering – Lone Pine Writings